Utah Division of Wildlife Resources is upda�ng components on two separate electrofishing boats. These boats are currently set up to operate with Coffelt electrofishing boxes and Honda generators. The boats are both approximately 18’ welded aluminum boats. The components of each boat we are needing to upgrade are as follows: Boat 1 • 1- electrofishing control box, with input plug for Honda 240V generator (additional specs for control box below) • 2 – (left and right) Adjustable front mounted boat booms for electrodes (we will weld and attach booms to boat) • 2 - electrode arrays (anode / droppers) designed for reservoir electrofishing with matching cathode array, include any hardware needed to attach to boom and/or boat • 1- safety mat for netter (kill switch) Boat 2 • 1- electrofishing control box, with plug for Honda 240V generator (additional specs for control box below) • 2 - electrode arrays (anode, droppers) designed for reservoir electrofishing with cathode array, include any hardware needed to attach to boom and/or boat • 1- safety mat for netter (kill switch) Control box specs: • Pulsed DC, 2 voltage ranges 0-300 & 300-600 VDC. • 90 amps peak current limit • Precise adjustment and metering of voltage and current • Backlit display for low light • Resettable shocking timer • 240 VAC generator powered • Splash-resistant construction including controls, connectors, and displays, must be clearly visible day and night